Go to next page; Disassembled > > > |
ce. 1960 Rickenbacker 105 Work progress for S. Ochoa |
Logue of Work in Progress (noted over pics taken of Steel prior to work) |
Incorrect pickup height screws have been replaced with correct type. |
Tape "potting" of coil was re-done fresh. |
Tuners were checked and lubed. |
Bridge and nut slots will be checked and if needed be adjusted for the best possible string plane leveling and alignment with pickup and fretboard paralax. |
All parts are being innocuously cleaned while leaving their clean aged condition (aka patina) intact. Finish oils will be renewed by a wipedown with a special light oil. All metal parts will receive a light TPFE oil coating to inhibit future corrosion. |
See all pages for other work scheduled, in progress or done. |
Will reset knobs heights lower and recommend knobs that are less intrusive to playing hands. |
Go to next page; Disassembled > > > |
