See NEXT PAGE, Pickup Height Settings  >>>
--- Danelectro 59DC;  1998-2003 R.I;  Black Burst ---
NOS / New Old Stock

~ Limited addition - 100 units R&D color ~
~ Never removed from original packaging ~

~ Pictures here taken in my shop during set up of the sister guitar ~
oOo
See NEXT PAGE, Pickup Height Settings  >>>
Checking the neck heel and pocket for accurate mating.  Although this has never been a problem for Danelectros,
....it's still good habit to start a setup wisely.
Checking strings alignment for proper neck heel / pocket and bridge set;  Again never a problem with a new Danelectro, but a good habit;  There can always be a 'first time' for everything !
Factory bridge plate setting is a bit too flat to get the best down-pressure communication between the strings, bridge
and body.
With years of experience it is quite easy to check the ends of the bridge saddle's proximity to the front plate screws for proper intonation for particular gauge-sets of strings.
Factory bridge plate longitudinal angle.
My bit-more down pressure tilt.
One of several times that the longitudinal and lateral string height along the fretboard must be checked